BPJPG - EA4212, HYSOL ES4212 PART A
- MSDS: BPJPG
- Manufacturer: DEXTER CORP
- Product Name: EA4212, HYSOL ES4212 PART A
- National Stock Number: 8030-00N018082
Product Identification
Product ID:EA4212, HYSOL ES4212 PART A
MSDS Date:06/17/1991
FSC:8030
NIIN:00N018082
Kit Part:Y
MSDS Number: BPJPG
Responsible Party
INDUSTRY, CA 91749-1282
US
Emergency Phone: 818-916-9107
Info Phone: 818-968-6511
Preparer: RICHARD L. HALL
Cage: 57294
Contractor
Telephone: 216-247-5000
Cage: 57294
Ingredients
EPICHLOROHYDRIN BIS-PHENOL A; (1-BISPHENOL A
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 35-60%
EPICHLOROHYDRIN (SARA III)
CAS: 106-89-8
RTECS: TX4900000
Fraction By Weight: <10% PPM
OSHA PEL S, 5 PPM
ACGIH TLV: S, 2 PPM; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
IN GENERAL, EMESIS INDUCTION IS
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MODERATELY IRRITATING.
SKIN:MODERATELY IRRITATING & MAY CAUSE SENSITIZATION. CONTACT
W/PRODUCT AT ELEVATED TEMPERATURES CAN RESULT IN THERMAL BURNS.
INHAL:NOT LIKELY TO BE HAZARD. INGEST:LOW ORDER OF ACUTE ORAL
TOXICITY.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:IRRITATION AS NOTED. SKIN SENSITIZATION
(ALLERGY) MAY BE EVIDENCED BY RASHES, ESPECIALLY HIVES.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN & EYE DISORDERS
MAY BE AGGRAVATED BY EXPOSURE TO PRODUCT. PREEXISTING SKIN/LUNG
ALLERGIES MAY INCREASE CHANCE OF DEVELOPING INCREASED ALLERGY
SYMPTOMS FROM EXPOSURE TO PRODUCT.
First Aid
First Aid:EYE:IMMED FLUSH W/PLENTY OF H*2O FOR @ LST 15 MINS WHILE
HOLDING EYELIDS OPEN. GET MD. SKIN:IMMED REMOVE CONTAM CLTHG/SHOES.
WIPE EXCESS FROM SKIN & FLUSH W/H*2O. WASH W/SOAP & H*2O. IF IRRIT
OCCURS, GET MD. DO NOT REUSE CLTHG UNTIL CLEANED. CONTAM LEATHER
ARTICLES, INCL SHOES, CANNOT BE DECONTAM & SHLD BE DESTROYED TO
PVNT REUSE. IF CONT W/HOT PROD OCCURS, IMMED FLUSH W/COOL H*2O FOR
15 (SUPDAT)
Fire Fighting
Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:CO*2, DRY CHEMICALS, FOAM, WATER SPRAY OR FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES. PROVIDE ADEQUATE
VENTILATION. COVER SPILL W/ABSORBENT MATERIAL & REMOVE TO WASTE
CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN CLOSED CONTAINERS IN COOL,
DRY AREA AWAY FROM HEAT. USE ONLY W/ADEQUATE VENTILATION.
Other Precautions:AVOID PROLONGED OR REPEATED BREATHING OF VAPORS OF
CONTACT W/SKIN.
Exposure Controls
Respiratory Protection:WEAR PROPERLY FITTED NIOSH/MSHA APPROVED SCBA OR
INDUSTRIAL TYPE CANISTER MASK IN ENCLOSED AREAS W/POOR OR NO
VENTILATION SYSTEM.
Ventilation:LOCAL EXHAUST PREFERRED. MECHANICAL ACCEPTABLE.
Protective Gloves:HYDROCARBON INSOL RUBBER/PLASTIC GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:HYDROCARBON INSOLUBLE APRONS, EYE WASH &
SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRST AID PROC:MINS. CAREFULLY REMOVE CLTHG; IF STUCK TO BURN DO NOT
PULL OFF, CUT AROUND IT. COVER BURN AREA W/CLEAN MATL. GET MD
IMMED. INHAL:REMOVE VICTIM TO FRESH AIR & PROVIDE O*2 IF BRTHG IS
DFC LT. GET MD. INGEST:DO NOT INDUCE VOMIT.IN GEN, NO TREATMENT IS
NEC UNLESS LG QTYS OF PROD ARE INGESTED. GET MD. (ING 3)
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:NIL
Spec Gravity:1.55
Evaporation Rate & Reference:>1 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK HIGH VISCOSITY LIQUID, OILY ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Conditions to Avoid Polymerization:STRONG ACIDS, AMINES, MERCAPTANS,
BASES.
Disposal
Waste Disposal Methods:SHOULD BE I/A/W FEDERAL, STATE & LOCAL
ENVIRONMENTAL CONTROL REGULATIONS. THIS IS NOT A HAZARDOUS WASTE
UNDER RCRA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.